Brass Strip
Nasandina Hilberê
Pelê tûncê ku li ser bingeha sifir, zinc û hêmanên şopê yên elektrolîtîkî wekî madeya xav a wê ye, bi navgîniya pêvajoyek bi lingê, germkirina germ, gerandina sar, dermankirina germê, paqijkirina rûkê, birrîn, qedandin, û dûv re jî pakkirinê.Performansa pêvajoyên materyal, plastîk, taybetmendiyên mekanîkî, berxwedana korozyonê, performans û tin baş.Ew bi berfirehî di pîşesaziyên elektrîkê, otomotîvê, ragihandinê, hardware, xemilandin û pîşesaziyên din de hatî bikar anîn
Parametreyên Teknîkî yên sereke
2-1Pêkhatina Kîmyayî
| Alloy No. | Pêkhatina Kîmyayî( %,Max.) | ||||||||
| Cu | Fe | Pb | Al | Mn | Sn | Ni | Zn | Nepaqijiyê | |
| H96 | 95,0-97,0 | 0.10 | 0.03 | --- | --- | --- | 0.5 | Rem | 0.3 |
| H90 | 88,0-91,0 | 0.10 | 0.03 | --- | --- | --- | 0.5 | Rem | 0.3 |
| H85 | 84,0-86,0 | 0.10 | 0.03 | --- | --- | --- | 0.5 | Rem | 0.3 |
| H70 | 68,5-71,5 | 0.10 | 0.03 | --- | --- | --- | 0.5 | Rem | 0.3 |
| H68 | 67,0-70,0 | 0.10 | 0.03 | --- | --- | --- | 0.5 | Rem | 0.3 |
| H65 | 63,5-68,0 | 0.10 | 0.03 | --- | --- | --- | 0.5 | Rem | 0.3 |
| H63 | 62,0-65,0 | 0.15 | 0.08 | --- | --- | --- | 0.5 | Rem | 0.5 |
| H62 | 60,5-63,5 | 0.15 | 0.08 | --- | --- | --- | 0.5 | Rem | 0.5 |
2-2 Table Alloy
| çîn | ISO | ASTM | JIS |
| H96 | CuZn5 | C21000 | C2100 |
| H90 | CuZn10 | C22000 | C2200 |
| H85 | CuZn15 | C23000 | C2300 |
| H70 | CuZn30 | C26000 | C2600 |
| H68 | ------ | ------- | ------ |
| H65 | CuZn35 | C27000 | C2700 |
| H63 | CuZn37 | C27200 | C2720 |
| H62 | CuZn40 | C28000 | C2800 |
2-3 Taybetmendî
2-3-1 Unit Specification: mm
| Nav | Alloy No. (Çîn) | Bitrî | Mezinayî(mm) | ||
| Qewîtî | Berî | Dirêjî | |||
| Brass Strip | H59 H62 H63 H65 H68 H70 | R | 4～8 | 600～1000 | ≤3000 |
| H62 H65 H68 H70 H90 H96
| Y Y2 M T | 0.2～0.49 | 600 | 1000～2000 | |
| 0.5～3.0 | 600～1000 | 1000～3000 | |||
Nîşana germ: O.Nerm; 1/4H.1/4 Zehmet;1/2H.1/2 Zehmet;H.Zehmet;EH.Ultrahard.
2-3-2 Unit Tolerans: mm
| Qewîtî | Berî | |||||
| Stûrahiya Destûrê Deviation ± | Firehiya Destûrê Deviation ± | |||||
| ＜400 | ＜600 | ＜1000 | ＜400 | ＜600 | ＜1000 | |
| 0,5~0,8 | 0.035 | 0.050 | 0.080 | 0.3 | 0.3 | 1.5 |
| 0,8~1,2 | 0.040 | 0.060 | 0.090 | 0.3 | 0.5 | 1.5 |
| 1.2~2.0 | 0.050 | 0.080 | 0.100 | 0.3 | 0.5 | 2.5 |
| 2.0~3.2 | 0.060 | 0.100 | 0.120 | 0.5 | 0.5 | 2.5 |
2-3-3 Performansa Mekanîkî
| Bitrî | Tensile Strength N/mm2 | Dirêjbûn ≥% | Hardness HV | |
| M | (O) | ≥290 | 35 | ------ |
| Y4 | (1/4H) | 325-410 | 30 | 75-125 |
| Y2 | (1/2H) | 340-470 | 20 | 85-145 |
| Y | (H) | 390-630 | 10 | 105-175 |
| T | (EH) | ≥490 | 2.5 | ≥145 |
| R |
---
| --- | --- | |
Nîşana germ: O.Nerm; 1/4H.1/4 Zehmet;1/2H.1/2 Zehmet;H.Zehmet;EH.Ultrahard.
Manufacturing Technique
